te60 60w single output external power test & measurement/industrial series www.slpower.com te60 rev 2.5 13-jan-16 1 features ? meets doe efficiency level vi requirements ? no load input power ? average efficiency ? up to 60w of ac-dc power ? universal input 90-264vac input range ? ip22 rated enclosure ? meets ?heavy industrial? levels of en61000 emc requirements ? meets en55011/cispr11, fcc part 15.109 class b conducted & radiated emissions, with 6db margin ? approved to en/iec/ul60950-1, 2 nd edition, am. 2 ? e-cap life of >8 years ? >900,000 hours mtbf ? 3 year warranty ? ip22 rated enclosure description a high performance ac to dc external power supply family designed for test & measurement and industrial applications. fully compliant with efficiency level vi requirements per u.s. dept. of energy, and also compliant to the heavy industrial levels of various en61000-4-x standards for emc. the te60a series models also meet class b conducted and radiated emi per fcc part 15, en55022, cispr22. designed to allow easy integration with test and measurement equipment and other industrial applications. model selection model output output ripple & line load output cable input number volts current power noise 1 regulation regulation & connector configuration te60a0551f01 5.0v 7.00a 35w 75mv pk-pk 1% 5% 6 pin molex type 2 class i desktop, iec60320 c14 receptacle te60a0903f01 9.0v 6.00a 54w 90mv pk-pk 1% 5% 1150mm long, ul2464, 18awg, 4 conductors; 2.5 x 5.5 x 9.5mm straight barrel type, center positive te60a1203f01 12.0v 5.00a 60w 120mv pk-pk 1% 5% te60a1503f01 15.0v 4.00a 60w 150mv pk-pk 1% 5% te60a1803f01 18.0v 3.40a 60w 180mv pk-pk 1% 5% te60a2403f01 24.0v 2.70a 60w 240mv pk-pk 1% 5% te60a4803f01 48.0v 1.35a 60w 480mv pk-pk 1% 5% te60a0551n01 5.0v 7.00a 35w 75mv pk-pk 1% 5% 6 pin molex type 2 class ii desktop, iec60320 c8 receptacle te60a0903n01 9.0v 6.00a 54w 90mv pk-pk 1% 5% 1150mm long, ul2464, 18awg, 4 conductors; 2.5 x 5.5 x 9.5mm straight barrel type, center positive te60a1203n01 12.0v 5.00a 60w 120mv pk-pk 1% 5% te60a1503n01 15.0v 4.00a 60w 150mv pk-pk 1% 5% te60a1803n01 18.0v 3.40a 60w 180mv pk-pk 1% 5% te60a2403n01 24.0v 2.70a 60w 240mv pk-pk 1% 5% te60a4803n01 48.0v 1.35a 60w 480mv pk-pk 1% 5% te60a0551q01 5.0v 7.00a 60w 75mv pk-pk 1% 5% 6 pin molex type 2 class ii desktop, iec60320 c18 receptacle te60a0903q01 9.0v 6.00a 54w 90mv pk-pk 1% 5% 1150mm long, ul2464, 18awg, 4 conductors; 2.5 x 5.5 x 9.5mm straight barrel type, center positive te60a1203q01 12.0v 5.00a 60w 120mv pk-pk 1% 5% te60a1503q01 15.0v 4.00a 60w 150mv pk-pk 1% 5% TE60A1803Q01 18.0v 3.40a 60w 180mv pk-pk 1% 5% te60a2403q01 24.0v 2.70a 60w 240mv pk-pk 1% 5% te60a4803q01 48.0v 1.35a 60w 480mv pk-pk 1% 5% notes: 1 . m e a s u r e d a t t h e o u t p u t c o n n e c t o r , w i t h n o i s e p r o b e d i r e c t l y a c r o s s o u t p u t a n d l o a d , t e r m i n a t e d w i t h 0 . 1 f c e r a m i c a n d 4 7 f l o w e s r c a p a c i t o r s . f o r 5 v a n d 6 v m o d e l s , v a l u e s l i s t e d are typical, 100mv pk-pk maximum. 2. molex p/n 39-01-2060 or equivalent. see outline drawing for pinout information. 3. for input class i models: for ac gnd connected to output common (-), insert a ?b? in the part number where the ?a? is located (te60b1203f01). 4. all specifications are typical at nominal input, full load, at 25 c ambient unless noted.
te60 60w single output external power test & measurement/industrial series www.slpower.com te60 rev 2.5 13-jan-16 2 general specifications ac input 100-240vac, 10%, 47-63hz, 1 ? turn on time less than 1 sec @115vac, full load input current 115vac: 1.5a, 230vac: 0.75a hold-up time 20ms min., at full load, 100vac input inrush current 264vac, cold start: will not exceed 40a overtemperature protection will shutdown upon an over-temperature condition, auto-recovery. input fuses f1, f2: 2a, 250vac fuses (line & neutral lines) provided on all models overload protection 130 to 180% of rating, hiccup mode earth leakage current i n p u t - g n d : < 5 0 0 a @ 2 6 4 v a c , 6 0 h z , n c output-gnd: <4ma@264vac, 60hz, nc short circuit protection hiccup mode, auto recovery. efficiency meets us doe efficiency level vi average efficiency levels overvoltage protection 130 to 150% of output voltage (max. 60v on 48v model), hiccup mode output power 60w continuous ? see models chart for specific voltage model ratings. isolation input-output: 4000vac input-ground: 1500vac output-ground: 1500vac no load input power <0.210w per doe efficiency level vi requirements safety standards en/csa/ul/iec 60950-1, 2nd edition, am 2 ripple and noise see models chart on pg 1. operating temperature -20c to +50c. derate above 40 c. start up at -40c, full load, (warmup period before all parameters are within published specifications). output voltage see models chart on pg 1. case temperature case temperatures are within regulatory guidelines. care should be taken to avoid prolonged contact with skin or other heat sensitive surfaces. transient response 500 s response time for return to within 0.5% of final value for any 50% load step over the range of 5% to 100% of rated load, ? i/ ? t< 0.2a/ s. max. voltage deviation is +/-3.5%. temperature derating derate output power above 40c to 52w at 50 c. e-cap life >7 year life based on calculations at 115vac/60hz & 230vac/50hz, ambient 25c at 24 hrs per day, 365 days/year, 6 power up cycles per day. (80% load on 12v model) mtbf >250,000 hours, full load, 110 & 220vac input, 25 c amb., per telcordia 332 issue 6. weight 400g storage temperature -40c to +85c safety drop test 1.4m from table top to wooden platform, 6 faces. altitude operating: to 5000m non-operating: -500 to 40,000 ft. dimensions w: 2.67? x l: 4.25? x h: 1.29? w: 67.9mm x l: 108mm x h: 32.7mm relative humidity 5% to 95%, non-condensing vibration operating: 0.003g/hz, 1.5grms overall, 3 axes, 10 min/axis, 1-500hz. non-oper.: random waveform, 3 minutes per axis, 3 axes and sine waveform, vib. frequency/acceleration: 10-500hz/1g, sweep rate of 1 octave / minutes, vibration time of 10 sweeps / axes, 3 axes shock operating: half-sine, 20gpk, 10ms, 3 axes, 6 shocks total non-operating: half-sine waveform, impact acceleration of 100g, pulse duration of 6 ms, number of shocks: 3 for each of the three axis all specifications are typical at nominal input, full load, at 25 c ambient unless noted.
te60 60w single output external power test & measurement/industrial series www.slpower.com te60 rev 2.5 13-jan-16 3 emi/emc compliance conducted emissions: en55011/cispr22 class b, fcc part 15.107, class b: 6db margin typ, at 115 and 230vac radiated emissions: en55022/cispr22 class b, fcc part 15.109, class b: 3db margin typ, at 115 and 230vac common mode noise: high frequency (100khz-20mhz): <40ma pk-pk electro-static discharge (esd) immunity on power ports: en55024/iec61000-4-2, level 4: +/- 8kv contact, +/- 15kv air, criteria a radiated rf em fields susceptibility en55022/en61000-4-3, 10v/m, 80mhz-2.7ghz, 80% am at 1khz electrical fast transients (eft) /bursts: en55024/iec61000-4-4, level 4, +/- 4kv, 100khz rep rate, 40a, criteria a surges, line to line (diff mode) and line to gnd (cmn mode) en55024/iec61000-4-5, level 4, +/-1kv dm, +/-4kv cm, criteria a conducted disturbances induced by rf fields en55022/iec61000-4-6, 10vrms ? level 4, in ism and amateur radio bands between 0.15mhz and 80mhz, 80% am at 1khz rated power frequency magnetic fields en55024/iec1000-4-8, level 4: 30 a/m, 50/60 hz voltage interruptions, dips, sags & surges en55024/iecen61000-4-11: --100% dip for 20ms, criteria a --100% dip for 5000ms (250/300 cycles), criteria b --60% dip for 100ms, criteria b --30% dip for 500ms, criteria a harmonic current emissions en55011/en61000-3-2, class a flicker test en61000-3-3 all specifications are typical at nominal input, full load, at 25 c ambient unless noted. mechanical drawing: notes: 1) all dimensions in (mm). 2) 2.5mm barrel connector shown, other options are available. 3) the unit should not be covered or enclosed to protect against excessive case temperature rise.
te60 60w single output external power test & measurement/industrial series www.slpower.com te60 rev 2.5 13-jan-16 4 connector information standard models include a 2.5 x 5.5 x 9.5mm straight barrel type connector (ault #3), center positive. other standard options are listed below. the ?03? in the standard model number is replaced by the applicable digits below: efficiency level vi information: data sheet ? 2016 sl power electronics corp. the information and specifications contained herein are believed to be correct at the time of publication. however, sl power accepts no responsibility for consequences arising from reproduction errors or inaccuracies. specifications are subject to change without notice. te60a series
|
